Similar Posts
How to create a timer in VHDL
In earlier tutorials we have used the wait for statement to delay time in simulation. But what about production modules? The wait for statement cannot be used for that. That only works in simulation because we can’t just tell the electrons in a circuit to pause for a given time. So how can we keep…
How to make ModelSim from Quartus Prime Lite work on Ubuntu 20.04
The ModelSim version that comes with Intel Quartus Prime Lite Edition is a good alternative if you want to try out VHDL simulation on your home computer. The software is available for both Windows and Linux, but Intel only supports Red Hat-based distros like CentOS Linux. Fortunately, you are just a few hacks away from…
Generate statement debouncer example
The generate statement in VHDL can automatically duplicate a block of code to closures with identical signals, processes, and instances. It’s a for loop for the architecture region that can create chained processes or module instances.
How to install a VHDL simulator and editor for free
Although VHDL and FPGA tools are often very expensive, it is easy to access state-of-the-art software for free if you are a student. There are several simulators, editors, and IDEs for working with VHDL. This article shows you how to install two of the most popular programs used by VHDL engineers. VHDL simulator Siemens EDA’s…
How to check if a vector is all zeros or ones
I know that I have googled this at least a hundred times throughout my career as an FPGA engineer; how to check if all bits in a std_logic_vector signal are ‘0’ or ‘1’. Of course, you know a few ways to do it already, but you want to find the most elegant code that will…
Stimulus file read in testbench using TEXTIO
Reading signal values from file is an alternative way of generating stimuli for the device on test (DUT). The testbench sequence and timing is hard-coded in a stimulus file that is read by the VHDL testbench, line by line. This allows you to easily change the pattern of the waveform that you want to feed…
Though those two codes are logically equivalent, the right one infers a transparent latch, it shouldn’t be used for synthesis.
I don’t think it does, but I’m not 100% sure what the synthesis tools do all the time.
This will infer a latch:
process(InSig) is begin if InSig = '0' then OutSig <= '1'; end if; end process;This shouldn’t create any latches:
process(InSig) is begin OutSig <= '0'; if InSig = '0' then OutSig <= '1'; end if; end process;A link to the question:
https://vhdlwhiz.com/wp-content/uploads/2017/09/quiz_part-2-q6.png
Hi sir, You designed this course very well and advanced. I am happy to recommend this course to my friends.
I’m glad you enjoyed it! And thanks for taking the time to leave a nice comment.