I’m from Norway, but I live in Bangkok, Thailand. Before I started VHDLwhiz, I worked as an FPGA engineer in the defense industry. I earned my master’s degree in informatics at the University of Oslo.
Similar Posts
FPGA course – Everything you need to know about the Dot Matrix VHDL Course
I’m excited to announce that the VHDL and FPGA course that I have been working on for the last six months is starting to become complete. The course is in beta at the moment, and I am planning on launching it for the first time this autumn. Who is the FPGA course for? The FPGA…
How to initialize RAM from file using TEXTIO
A convenient way to populate block RAM with initial values is to read binary or hexadecimal literals from an ASCII file. This is also a good way to create a ROM (read-only memory) in VHDL. After all, RAM and ROM are the same thing in FPGAs, ROM is a RAM that you only read from….
How to make an AXI FIFO in block RAM using the ready/valid handshake
I was a little annoyed by the peculiarities of the AXI interface the first time I had to create logic to interface an AXI module. Instead of the regular busy/valid, full/valid, or empty/valid control signals, the AXI interface uses two control signals named “ready” and “valid”. My frustration soon changed to awe. The AXI interface…
How to use constants and Generic Map in VHDL
Creating modules is a great way to reuse code, but often you need the same module with smaller variations throughout your design. This is what generics and the generic map are for. It allows you to make certain parts of the module configurable at compile-time. Constants are used when we want to avoid typing the…
Basic VHDL quiz – Part 3
Test your progress with this VHDL quiz after completing tutorials 12-17 from the Basic VHDL Tutorial series!
Stimulus file read in testbench using TEXTIO
Reading signal values from file is an alternative way of generating stimuli for the device on test (DUT). The testbench sequence and timing is hard-coded in a stimulus file that is read by the VHDL testbench, line by line. This allows you to easily change the pattern of the waveform that you want to feed…
Though those two codes are logically equivalent, the right one infers a transparent latch, it shouldn’t be used for synthesis.
I don’t think it does, but I’m not 100% sure what the synthesis tools do all the time.
This will infer a latch:
This shouldn’t create any latches:
A link to the question:
https://vhdlwhiz.com/wp-content/uploads/2017/09/quiz_part-2-q6.png
Hi sir, You designed this course very well and advanced. I am happy to recommend this course to my friends.
I’m glad you enjoyed it! And thanks for taking the time to leave a nice comment.