I’m from Norway, but I live in Bangkok, Thailand. Before I started VHDLwhiz, I worked as an FPGA engineer in the defense industry. I earned my master’s degree in informatics at the University of Oslo.
Similar Posts
How to create a signal vector in VHDL: std_logic_vector
The std_logic_vector type can be used for creating signal buses in VHDL. The std_logic is the most commonly used type in VHDL, and the std_logic_vector is the array version of it. While the std_logic is great for modeling the value that can be carried by a single wire, it’s not very practical for implementing collections…
How to use conditional statements in VHDL: If-Then-Elsif-Else
In the previous tutorial we used a conditional expression with the Wait Until statement. The expression ensured that the process was only triggered when the two counter signals where equal. But what if we wanted the program in a process to take different actions based on different inputs? The If-Then-Elsif-Else statements can be used to…
How a signal is different from a variable in VHDL
In the previous tutorial we learned how to declare a variable in a process. Variables are good for creating algorithms within a process, but they are not accessible to the outside world. If a scope of a variable is only within a single process, how can it interact with any other logic? The solution for…
How to use a procedure in a process in VHDL
It is possible to drive external signals from a procedure. As long as the signal is within the scope of the procedure, it can be accessed for reading or writing, even if it isn’t listed in the parameter list. Procedures that are declared in the declarative region of the architecture, cannot drive any external signals….
How to generate random numbers in VHDL
VHDL has a built-in pseudo-random generator, but it can only generate floating-point numbers between 0 and 1. Fortunately, you can derive from this any other kind of random data format you should need. Continue reading this article to find out how to produce real or integer values of any range, as well as random std_logic_vector…
How to use a procedure in VHDL
A procedure is a type of subprogram in VHDL which can help us avoid repeating code. Sometimes the need arises to perform identical operations several places throughout the design. While creating a module might be overkill for minor operations, a procedure is often what you want. Procedures can be declared within any declarative region. The…
Dear Jonas
Thanks for the content, thumbs up. please keep up the good work!
Best Regards
Thanks! That’s good to hear.
You are doing a very nice job. Top quality!
Thanks! I really appreciate your comment.
Hello Jonas
You really did save me by these great videos and materials.
These tutorials are the best thing on the internet.
Thank you for creating them.
Thanks! That’s encouraging to hear. I will do my best to keep up the quality of my blog posts.
Thank you so much man you are awesome! i learnt vhdl in university but i forgot after all years. i started again working. You help me too much! i will continue to course after this beginner course. i am planning the begin beginner fast track ! please dont stop the teaching us . thank you so much! greetings from turkey 🙂
Hello, Utku. Thank you for the nice comment! I’m glad you found my blog to be helpful. I will keep the free and premium content coming your way.
Thank you for providing such great content on a subject that imo can be tricky to really understand. But you make it easy for everyone!
That’s great to hear! I will keep on creating tutorials and articles for you. ?
Dear Jonas,
I’m an electronic engineer from Morocco, currently studying for a masters degree in microelectronics and sensors in France.
You helped me a lot to remember some of the vhdl basics and get more further into it.
I worked on an academic project using basys3 and vivado for a vga controller.
Thank you very much for this great content, keep up the good work.
I’m glad you like the quiz. It’s a good way to refresh your knowledge. 🙂
Excellent learning tool
Thanks! By the way, I also use quizzes in the VHDLwhiz membership.
Great tutorials! Short and sweet!
I’ll be sure to go onto the FPGA and VHDL Fast-Track after completing the basic tutorials..
Thanks, Dale! Also, check out the VHDLwhiz Membership, which gives you multiple courses, resource items, and coding challenges and supports your success in FPGA design.
Nice quiz, only problem is sharing your score on facebook is not working.
Thanks for the feedback. I’ve created a task on this. I’ll see if I can fix it when I have the time.