I’m from Norway, but I live in Bangkok, Thailand. Before I started VHDLwhiz, I worked as an FPGA engineer in the defense industry. I earned my master’s degree in informatics at the University of Oslo.
Similar Posts
How to use constants and Generic Map in VHDL
Creating modules is a great way to reuse code, but often you need the same module with smaller variations throughout your design. This is what generics and the generic map are for. It allows you to make certain parts of the module configurable at compile-time. Constants are used when we want to avoid typing the…
How to create a concurrent statement in VHDL
A concurrent statement in VHDL is a signal assignment within the architecture, but outside of a normal process construct. The concurrent statement is also referred to as a concurrent assignment or concurrent process. When you create a concurrent statement, you are actually creating a process with certain, clearly defined characteristics. Concurrent statements are always equivalent…
How to create a breathing LED effect using a sine wave stored in block RAM
I’ve noticed that many of the gadgets that I’ve bought the last couple of years have shifted away from LED blinking to led breathing. Most electronic gizmos contain a status LED whose behavior gives away indications of what’s going on inside of the device. My electric toothbrush flashes an LED when it’s time to recharge…
How a signal is different from a variable in VHDL
In the previous tutorial we learned how to declare a variable in a process. Variables are good for creating algorithms within a process, but they are not accessible to the outside world. If a scope of a variable is only within a single process, how can it interact with any other logic? The solution for…
How to check if a vector is all zeros or ones
I know that I have googled this at least a hundred times throughout my career as an FPGA engineer; how to check if all bits in a std_logic_vector signal are ‘0’ or ‘1’. Of course, you know a few ways to do it already, but you want to find the most elegant code that will…
FPGA course – Everything you need to know about the Dot Matrix VHDL Course
I’m excited to announce that the VHDL and FPGA course that I have been working on for the last six months is starting to become complete. The course is in beta at the moment, and I am planning on launching it for the first time this autumn. Who is the FPGA course for? The FPGA…
Dear Jonas
Thanks for the content, thumbs up. please keep up the good work!
Best Regards
Thanks! That’s good to hear.
You are doing a very nice job. Top quality!
Thanks! I really appreciate your comment.
Hello Jonas
You really did save me by these great videos and materials.
These tutorials are the best thing on the internet.
Thank you for creating them.
Thanks! That’s encouraging to hear. I will do my best to keep up the quality of my blog posts.
Thank you so much man you are awesome! i learnt vhdl in university but i forgot after all years. i started again working. You help me too much! i will continue to course after this beginner course. i am planning the begin beginner fast track ! please dont stop the teaching us . thank you so much! greetings from turkey 🙂
Hello, Utku. Thank you for the nice comment! I’m glad you found my blog to be helpful. I will keep the free and premium content coming your way.
Thank you for providing such great content on a subject that imo can be tricky to really understand. But you make it easy for everyone!
That’s great to hear! I will keep on creating tutorials and articles for you. ?
Dear Jonas,
I’m an electronic engineer from Morocco, currently studying for a masters degree in microelectronics and sensors in France.
You helped me a lot to remember some of the vhdl basics and get more further into it.
I worked on an academic project using basys3 and vivado for a vga controller.
Thank you very much for this great content, keep up the good work.
I’m glad you like the quiz. It’s a good way to refresh your knowledge. 🙂
Excellent learning tool
Thanks! By the way, I also use quizzes in the VHDLwhiz membership.
Great tutorials! Short and sweet!
I’ll be sure to go onto the FPGA and VHDL Fast-Track after completing the basic tutorials..
Thanks, Dale! Also, check out the VHDLwhiz Membership, which gives you multiple courses, resource items, and coding challenges and supports your success in FPGA design.
Nice quiz, only problem is sharing your score on facebook is not working.
Thanks for the feedback. I’ve created a task on this. I’ll see if I can fix it when I have the time.